XACT supports custom panel and bulkhead harness assemblies for equipment that connects through an enclosure wall. A panel connector creates a defined point between an external cable and the wiring inside the equipment. Our military interconnect capabilities include panel and bulkhead connections for suitable programs.
A connection on both sides of the panel
The visible connector is one part of the assembly. Behind it, conductors must reach the intended module, terminal or mating connector without conflicting with other enclosure features. Outside it, the mating lead must have room to connect and leave the panel in the intended direction.
A custom harness brings those two sides into the supplied configuration. Connector orientation, internal branch layout and termination choices can be considered together. This is particularly useful where an enclosure contains several modules but presents a limited number of accessible interfaces to the operator or surrounding equipment.
The harness follows the interface
XACT manufactures custom cable assemblies and wire harnesses, with engineering review available for the proposed build. A panel harness can be developed around a customer drawing or a defined equipment arrangement, including the circuits and endpoints that belong to that interface.
The connection may carry power or signals, with construction matched to the specified electrical role. Where shielding is required, the connector and cable arrangement can be reviewed as part of the assembly. A bulkhead connector on its own does not define the shielding or sealing performance of the complete enclosure.
A supplied assembly for the equipment build
Bringing panel connections and internal wiring into one manufacturing discussion keeps their physical relationship visible. The panel position, harness route and module endpoints become parts of the same assembly definition. Prototype support can help connect that definition to the enclosure layout.
We support applicable repeat-production programs after the configuration is established. For a panel interface that needs a custom electrical harness behind it, use the Cable Assembly Tool to discuss your connector arrangement and equipment connections with XACT.